hitron electronics corporation. b4-11, p.o. box 26-110 kaohsiung export processing zone kaohsiung 806 taiwan tel: 886-7-821041 0/fax: 886-7- 8419917, 886-7- 8210511/e-mail: sales@hitron-e.com/ web-site: www.hitron-e.com may 31, 2013 1 h hitron universal input ac-dc medical & ite application open frame internal swi tching power supplies 50watts green power single output HICM50G series features: ? compact 4?x2? pcb format ? free air convection ? no load power consumption <0.3w ? international efficiency level v ? meet medical standards iec60601-1 & ite standards iec60950-1 ? emi meet cispr en55022 class b ? ce marking compliance output specification output voltage: see ratings chart. output current: see ratings chart. output connector: v-m connector. output wattage: 20-50 watts. line regulation: typical 0.1%. load regulation: typical 1.5%. noise & ripple: typical 1.0% peak to peak. ovp: built-in at vo1(latch). adjustability: not available. overload protection (olp): fully protected against output s overload and short circuit. typ. olp set at 125-150% of rating output power. consult the factory for olp setting. specification input specification input voltage: range typ. 90-264vac. rating 100 to 240vac. input connector: v-m connector. input frequency: 47-63hz. inrush current: 10a rms at cold start 230vac. input current: typ. 0.7a at 115vac, 0.4a at 230vac. dielectric withstand: meet iec 60950-1 & iec60601-1. emi: meet cispr en55022 class b (please refer to note 4). hold-up time: typ. 16ms at 115vac, 90.ms at 230vac. earth leakage: less than 0.2ma at 230vac. no load power: less than 0.3watt. general specification efficiency: typ. 83-90% (various with the output voltage) switching frequency: 65k hz. circuit topology: fixed frequency flyback circuit. transient response: output voltage returns in less than 1ms following a 25% load change. safety standard: iec 60950-1 & iec60601-1 class i. operating temperature: -20 to +50 c at full load without forced air flow. storage temperature: -25 to +85c. cooling: free air convection. construction: 4?x2?x1.01? pcb format. power density: 6.2 watts / cubic inch. note: (1) all measurements are at nominal input, full load, and +25c unless otherwise specified. (2) load regulation is measured at 115vac or 230vac in percentage to indicate the change in output voltage as the load varied f rom half load to full load ( ? %). (3) due to requests in market and advances in technology, specifications subject to change without notice. (4) radiated emi can pass class b with external t core input and output added. for the details of safety approv al, please consult the factory
hitron electronics corporation. b4-11, p.o. box 26-110 kaohsiung export processing zone kaohsiung 806 taiwan tel: 886-7-821041 0/fax: 886-7- 8419917, 886-7- 8210511/e-mail: sales@hitron-e.com/ web-site: www.hitron-e.com may 31, 2013 2 output voltage / current ratings chart mechanical dimensions: mm [inches] weight: 141g (4.79 oz.) single output main vo1 model no. min. typ. volt. max. HICM50G-s033700 0.0a 7.00a 3.3v 7.00a HICM50G-s050700 0.0a 7.00a 5.0v 7.00a HICM50G-s120416 0.0a 4.16a 12.0v 4.16a HICM50G-s150340 0.0a 3.40a 15.0v 3.40a HICM50G-s240210 0.0a 2.10a 24.0v 2.10a HICM50G-s360140 0.0a 1.40a 36.0v 1.40a HICM50G-s480105 0.0a 1.05a 48.0v 1.05a input & output connectors pin assignment ac input single output assignment ac-l ac-n ac-g vo1 dc com cntr/pin# p1-3 p1-1 g p2 -3,4 p2-1,2 mating connector: p1,2 molex # 5195 or 5239 series.
|
